Marine rubber airbag for ship launching or landing
Product Description
Structure Marine air bag
The structure of gas-filling rubber airbag. It can consists of bag body and iron-end component. The bag body is manufactured by vulcanizing preliminary shaped airbag made of base rubber and reinforced fiber material. The material of the iron-end component is metal and it is connected to the bag body firmly
Advantages
1. High strength
2. Wear resistance and anti-aging
3. Good air tightness
4. Safety and reliability
5. High kneading&compressing resistance and damping capacity
type | D=0.8m | D=1.0m | D=1.2m | D=1.5m | D=1.8m | D=2.0m |
3 layers | 0.13MPA | 0.10MPA | 0.09MPA | 0.07MPA | 0.06MPA | 0.05MPA |
4 layers | 0.17MPA | 0.13MPA | 0.11MPA | 0.09MPA | 0.08MPA | 0.07MPA |
5 layers | 0.21MPA | 0.17MPA | 0.14MPA | 0.11MPA | 0.09MPA | 0.08MPA |
6 layers | 0.25MPA | 0.20MPA | 0.17MPA | 0.13MPA | 0.11MPA | 0.10MPA |
7 layers | 0.29MPA | 0.23MPA | 0.20MPA | 0.15MPA | 0.13MPA | 0.12MPA |
8 layers | 0.33MPA | 0.26MPA | 0.23MPA | 0.17MPA | 0.15MPA | 0.14MPA |
The above specification only is our standard specification arrange. Other specification of Ship Launching Airbags also available upon clients’ request.
Contact us if you need more details on Marine Rubber Airbag. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Natural rubber airbag、Ship Launching Rubber Airbag. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Marine Airbag